What deep processing can FGTECH Glass machinery do?

1. tempered glass. It is a prestressed glass made of ordinary flat glass after reprocessing. Compared with ordinary flat glass, tempered glass has two major characteristics:

(1) The strength of the former is several times that of the latter, the tensile strength is more than 3 times that of the latter, and the impact resistance is more than 5 times that of the latter.

(2) tempered glass is not easy to break, even if broken, it will be broken in the form of particles without acute Angle, and the harm to the human body is greatly reduced.

2.frosted glass. It is also frosted on top of ordinary flat glass. The general thickness is mostly below 9 percent, and the thickness is mostly 5 or 6 percent.

3. Sandblasted glass. The performance is basically similar to frosted glass, and different frosted sand is blasted. Because the two are visually similar, many owners and even experienced decoration personnel confuse them.

4. Embossed glass. It is a flat glass made by calendering method. It is characterized by light transmission and opacity, and is mostly used in decoration areas such as toilets.

5.wire glass. Is the use of calendering method, the metal wire or metal mesh embedded in the glass plate made of a flat glass with impact resistance, when the impact will only form a radiating crack without falling down to hurt. Therefore, it is mostly used in high-rise buildings and factories with strong vibration.

6. Insulating glass. The adhesive method is used to keep two pieces of glass at a certain interval, the interval is dry air, and the surrounding is sealed with sealing materials, mainly used in the renovation project with sound insulation requirements.

7.laminated glass. Laminated glass is generally composed of two ordinary flat glass (can also be tempered glass or other special glass) and an agricultural production system adhesive layer between the glass. When damaged, the debris is still adhered to the adhesive layer, avoiding the damage of the debris splashing on the human body. It is mostly used for decoration projects with safety requirements.